سختی سنج پرتابل

فروش سختی سنج پرتابل ساخت کمپانی Salutron آلمان مدلD600 Technical Specifications Hardness units HL (Leeb), HB (Brinell), HRB (Rockwell B), HRC (Rockwell C), HV (Vickers), HS (Shore D) Measuring range 170 - 960 HLD Measuring direction 360° Standard impact device D Memory size 48-600 groups (relative to number of impact impact times 1-32) Statistics Number of group, date, average value, impact device, impact times, material, measured values Setting of limits Acoustic signal by overstepping preset min. und max. limits Minimum weight of sample » 5kg solid material; 2-5kg on stable surface; « 2kg with coupling paste on stable surface Memory function Manually or automatically Data transfer Cable (both USB and RS232-connection) und software Languages device and manual English Display 128 × 64 Dot-Matrix-LCD Backlight ON / OFF key Battery capacity 100 hours (without backlight) Auto Power Off After 5 minutes Power supply 2 x 1,5 Volt-AA-batteries Relative humidity ≤ 90% Working temperature -10°C to +40°C Weight 380 g (with batteries) Size 125 x 67 x 30mm Equipment Main Application Impact device D: Universal device for most hardness requirements Impact device DC: Ultra-short version; manually loaded on the front; same characteristics as type D; for testing in boreholes, built-in parts, hollow cylindrical parts, etc.; max. 940 HV Impact device D+15: The front part is narrow and the coil is located behind it; same characteristics as type D; only for steel; for hardness testing in slots, grooves, recessed areas, gear flanks, grooves, cavities, tooth flanks, etc.; max. 940 HV Impact device G: With large test-tip diameter; impact energy 9 times larger than type D; on steel, gray or nodular cast iron; for large cast parts and forgings or parts with high surface roughness; max. 650 HB (only in Brinell) Impact device C: Reduced impact energy of about ¼ of type D; for tempered or surface treated steel, small or sensitive-to-shock parts (minimal imprint is left); max. 1000 HV Impact device E: With a synthetic diamond test tip of approx. 5000 HV; for very hard materials (above 50 HRC / 650 HV) such as carbide, barrels, etc.; max. 1200 HV Impact device DL: With extremely long and fine front piece only for steel and cast steel; for testing in narrow or hard to reach areas; max. 950 HV Standard Impact Device D HRB HRC HB HV HS Steel, Cast Steel 38-100 20-69 127-651 83-976 32-100 Cold Work Steel - 20-67 - 80-898 - Stainless Steel 47-102 - 85-655 85-802 - Gray Cast Iron - - 93-334 - - Nodular Cast Iron - - 131-387 - - Aluminum Alloys 24-85 - 19-164 - - Brass 14-95 - 40-173 - - Bronze - - 60-290 - - Copper - - 45-315 - - Impact devices for HardyTest D600® Main unit Impact device D Cleaning brush Small support ring High value Leeb test block Manual Service-case USB/RS232-cable Software HT-50 Data View on USB Stick – – – – – – – – – Set of supporting rings Printer Other impact devices – – – Standard delivery Optional Technical details are subject to change.