داروی ظهور و ثبوت دندانپزشکی

محلول ظهور و ثبوت دندانپزشکی Calbe ساخت کشور آلمان محلول ظهور و ثبوت دندانپزشکی Calbe به صورت غلیظ می باشد و برای مصرف مقدار مورد نیاز را با نسبت 1:4 با آب ولرم خالص رقیق نمائید. تولید کمپانی Calbe کشور آلمان ، عرضه در شرکت طب و تصویر پارسیان بسته بندی محلول ظهور و ثبوت رادیولوژی calbe به صورت : نیم لیتر داروی ثبوت + نیم لیتر داروی ظهور حجم هر بطری: 500 میلی لیتر اصول فرآیند استفاده از محلول ظهور و ثبوت دندانپزشکی :  ظهور ثبوت شست و شو خشک کردن amount in dilute 1: 4 ratio with lukewarm pure water. Emergence stage: The main purpose of the emergence stage is to turn the hidden image into a visible image. For this purpose, the silver halide grains in the film that are irradiated are converted to metallic silver. Proof stage: The purpose of this step is to fix the image and wash the silver halides and stabilize as well as stop the action of the emergence drug absorbed in the emulsion. Description : DENTAMAT 500 is a dental film-developing set ( developer and fixer ) for developing of dental films in immersion developing machines ( Clarimat Universal, Standard, Dry-O-Mat, Girardelli X-3 and X-3D a.o. ). The concentrates secure optimal processing and ability for archiving of the dental films . The manual processing in dish or tank is also possible . Developer- and fixer concentrates are one - part . Mix Instructions : preparation fixing bath: 1. Pour out fixer concentrate into the fixing tank . 2. Fill the empty bottle with water ( 20 - 23 °C ) and fill up the fixing tank to the final volume . 3. Stir the ready to use solution thoroughly . preparation developer : 1. Pour out developer concentrate into the developing tank . 2. Fill the empty bottle with water ( 20 - 23 °C ) and fill up the developing tank to the final volume . 3. Stir the ready to use solution thoroughly . Manual Processing : Preparation of ready to use developer and fixer solution from concentrate : 0,5 l concentrate + 1,25 l water = 1,75 l developer or fixer ( dilution rate 1 + 2,5 ) Replenishment : When required fill up the respective tank of the immersion developing machine with water to the final volume - at least once a week !